01
Approach in the dark.
The sensor waits for movement.
Rechargeable Magnetic Motion Sensor Light
Choose your light pack
A little light where you need it.
Light the way to the closet, down the hall or out of bed with a lamp that responds to motion after dark.
- 1, 2, 3 or 5 lights in Warm White or Cool White
- Motion and ambient light sensors
- Magnetic mount · USB rechargeable
$20.99 USD/ selected pack
Choose a pack size and light color below01 / A light for the places you use most
A little light.
A familiar route.
From getting out of bed to walking down the hall, put a little light where you need it after dark.
Motion sensingMagnetic mountUSB charging
Choose your pack
02 / How motion mode works
Walk up. Light on.
Keep going.
The sensor responds to movement after dark. The lamp switches off automatically once movement stops.
02
The light turns on.
See the floor or shelf in front of you.
03
It switches off on its own.
Once movement stops, the light turns off automatically.
03 / A closer look
Small by design.
Easy to live with.
A round lamp with an integrated sensor, a removable magnetic mount and a USB charging port.
- PIR sensorDetects motion in the dark.
- Magnetic mountLift the light off the mount to recharge.
- Charging indicatorRed while charging, green when fully charged.
- Two light colorsChoose Warm White or Cool White.
04 / Find its place at home
Bedside. Hallway. Closet.
Light the corners you use.
Start with one spot you often pass at night, or choose a larger pack for several rooms.
At the bedside
A warm glow when you get out of bed.
Along the hallway
A light that comes on as you pass.
Inside the closet
See what you need on a dark shelf.
Around the home
Place one wherever you often walk after dark.
05 / Check the fit
About 8 × 2 cm.
A compact round light.
Choose a flat, dry indoor surface with room to lift the light off its magnetic mount when it needs a charge.
Approx. 8 cm acrossApprox. 2 cm deep
06 / Set it up
Peel. Press. Snap into place.
Start with a clean, dry indoor surface. Install the adhesive mount first, then attach the light.
-
01 / Peel
Peel off the backing
Remove the protective liner from the adhesive side of the mount.
-
02 / Press
Press the mount onto the surface
Position the mount with the adhesive side facing the surface and press it firmly into place.
-
03 / Snap
Attach the light to the mount
Bring the back of the light to the mount until the magnet holds it in place.
07 / Specifications
Four pack sizes.
Choose your color.
Every light in a pack comes in the selected color.
- Pack and color
- 1, 2, 3 or 5 lights · Warm White or Cool White
- Motion detection
- PIR sensor · approx. 3–5 m · 120°
- Power and battery
- 0.6 W · rechargeable 120 mAh battery
- Charging
- Approx. 2 hours via USB
- Dimensions
- Approx. 8 × 2 cm per light
- Use
- Dry indoor spaces
08 / Frequently asked questions
Ready to light the way?
How many lights come in a pack?
Choose a pack of 1, 2, 3 or 5 lights. All lights in the pack come in your chosen light color.
Can I remove the light to charge it?
Yes. Lift it off the magnetic mount and plug it in to charge via USB.
Where can I use the light?
Use it in dry indoor spaces such as a hallway, bedroom or closet.
Will it turn on in a bright room?
In motion mode, the ambient light sensor keeps the lamp off when the room is bright.
Rechargeable Magnetic Motion Sensor Light$20.99 USD